B460 Medium Duty Joist Hanger (Long Leg)

Form or Table
Please select from the options above.

B460 Medium Duty Long Leg Jiffy / Woody Hanger

Manufactured from 1.2mm thick pregalvanised steel the B460 offer 460mm long legs, suitable for I-Beam applications, either face fixed or wrapped over supporting joists.

For loft conversion applications where the hanger extends below the supporting beam, a maximum drop of 75mm is recommended. Design features a location tab on the hanger base, designed to allow quick and accurate alignment of the hanger.

Produced from galvanised steel to BS EN 10346:2009 DX51D + G275 as standard. Galvanised hangers must be fixed using 30 x 3.75mm sheradised square twisted nails in all pre-punched holes.

50mm wide strap legs.

 Product Reference  S.W.L.(KN)**  Width (W)  Side (S)  Leg (L)
 B460  7.0  All Sizes  185mm  460mm

Bearing Surface 50mm

Please note: Safe Working Loads stated above are the lower of the load at 2.5mm deflection of the hanger tested or medium term loads in accordance with BS5268/EC5.

Full Data Sheets are available for the above products, based on independent destructive testing and analysis carried out by Ceram Research or Huddersfield University.

See the Download Section for the Data Sh

TypeB460 Medium Duty Long Leg Hanger

There are no reviews for this product yet. Be the first to add one!

There are no reviews for this product yet. Be the first to add one!