SPMH/S Single Piece Masonry Hanger

Width
Height
Please select from the options above.
Quantity
-
+

BPC SPMH/S Single Piece Masonry Hanger

CE Marked and tested to BS EN 845-1:2003

The standard Single Piece Masonry Hanger is designed for building into brickwork or blockwork.

As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel to BS EN 10346 : 2009, DX51D + G600 compliant with BS6178: Part 1:1990 and to the requirements of BS5268.

Wide top flange design offers increased loading capacity on masonry with a minimum crushing strength of 2.8N/mm2 and above. Hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists.

All hangers feature 75mm bearing surface and pre-punched side gussets to allow nail fixing into timber joists with 30 x 3.75mm sherardized square twist nails.

Available in the following depths and widths:

  • Width: 38mm, 44mm, 47mm, 50mm, 63mm, 75mm, 100mm, 125mm, 150mm
  • Depth: 100mm, 125mm, 150mm*, 175mm*, 200mm*, 225mm*, 250mm*
  • Bearing Surface: 75mm
  • *Please note: As standard all hangers 150mm deep and above are manufactured 10mm less to allow for regularised timber and to ensure that joist levels are maintained.

    TypeBPC SPMH/S Single Piece Masonry Hanger

    There are no downloads for this product.

    There are no reviews for this product yet. Be the first to add one!

    There are no reviews for this product yet. Be the first to add one!