FEBPROOF PLUS 5LT
For screeds, mortars and non-structural concrete rendering. Conforms to BS4887.
Improved workability
High resistance to water
Reduces incidence of efflorescence
Product Descriptions
Febproof plus reduces water absorption and makes mortar or non-structural concrete less permeable. Due to its strong air-entraining plasticiser, the water cement ratio is much lower for the same workability. Febproof plus has been tested to the requirements of EN 934 Part 3.
Typical Uses
Febproof plus is suitable for use in rendering finishes and pointing mortars. It is also used in reconstructed stone and non structural concrete members.
External rendering
Special finishes
Pebble dash
Roughcast
Stucco etc
Reconstructed stone
Features & Benefits
Improves weathering properties.
Reduced suction aids pebble dashing - larger areas covered easily.
Improves water resistance.
Reduces onset of efflorescence.
Improved application properties.
Supplements / replaces lime.
Drying shrinkage, crazing and cracking reduced.
Improved frost resistance.
Febproof plus contains a highly hydrophobic material which is dispersed throughout the mix and thus reduces moisture penetration.
Febproof plus also entrains air and this reduces capillary and water channel development, thus ensuring greatly increased water tightness and resistance to frost. In addition, due to its plasticising action, reductions in water content of up to 20% are attained. Febproof plus slightly retards the mix, e.g A 3:1 sand/cement mix will be retarded by about an hour.
Performance data
Specific gravity @ 20°C 1.010
pH 11.60
Chloride Ion Content <0.1% (w/w) of admixture (nil)
Freezing point -3°C
Water absorption
(dosage 750ml/50kg cem) 5% compared to 15% for a standard 4:1 sand/cement mix
Set time ASTM C403: 1990
(dosage 750ml/50kg cem) 100% longer than control
Improved workability
High resistance to water
Reduces incidence of efflorescence
Product Descriptions
Febproof plus reduces water absorption and makes mortar or non-structural concrete less permeable. Due to its strong air-entraining plasticiser, the water cement ratio is much lower for the same workability. Febproof plus has been tested to the requirements of EN 934 Part 3.
Typical Uses
Febproof plus is suitable for use in rendering finishes and pointing mortars. It is also used in reconstructed stone and non structural concrete members.
External rendering
Special finishes
Pebble dash
Roughcast
Stucco etc
Reconstructed stone
Features & Benefits
Improves weathering properties.
Reduced suction aids pebble dashing - larger areas covered easily.
Improves water resistance.
Reduces onset of efflorescence.
Improved application properties.
Supplements / replaces lime.
Drying shrinkage, crazing and cracking reduced.
Improved frost resistance.
Febproof plus contains a highly hydrophobic material which is dispersed throughout the mix and thus reduces moisture penetration.
Febproof plus also entrains air and this reduces capillary and water channel development, thus ensuring greatly increased water tightness and resistance to frost. In addition, due to its plasticising action, reductions in water content of up to 20% are attained. Febproof plus slightly retards the mix, e.g A 3:1 sand/cement mix will be retarded by about an hour.
Performance data
Specific gravity @ 20°C 1.010
pH 11.60
Chloride Ion Content <0.1% (w/w) of admixture (nil)
Freezing point -3°C
Water absorption
(dosage 750ml/50kg cem) 5% compared to 15% for a standard 4:1 sand/cement mix
Set time ASTM C403: 1990
(dosage 750ml/50kg cem) 100% longer than control
| Stock Code | *FEBPROOFPS5 |
|---|---|
| Price | £4.82 (exc VAT) Each |
Return to: Feb Building Product Range
